How do I update my Motorola SURFboard SBG6580?
There is no support for manual upgrades in the SBG6580. It is necessary to implement any firmware or software changes over the cable network. It is up to the cable provider to update the firmware based on what they have approved.
How do I fix my Motorola SURFboard SBG6580?
Unplug the SBG6580 from the power, wait 10 seconds, then plug back into power. Once the SBG6580 is full on and the top four LED lights are solid, power cycle all effected client devices. If this does not resolve the issue, proceed to the section Troubleshooting Wi-Fi Connections.
How do I setup my Motorola SBG6580 wireless router?
Installing SBG6580
- Verify that the coaxial cable is connected to the cable outlet.
- Connect the other end of the coaxial cable to the Cable connector on the modem.
- Plug the power cord into the power connector on the SBG6580.
- Plug the power cord into the electrical outlet.
How do I update my Motorola Surfboard?
To make sure you have the latest firmware update from us: Power off your cable modem for 15 seconds, and then turn it on again. As it reboots, your modem will check if it’s running the latest code from your service provider. If your modem does not have the latest code/firmware, it will download the latest version.
How do I reset my Motorola SBG6580 password?
Resetting Password Do the hard reset by holding down the white reset button on the back panel with a pen for 30 seconds and reset default.
How do I access Motorola SBG6580?
Launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://192.168.0.1 into the address box, and press the Enter key. The Login page will appear.
How do I reset Motorola SBG6580?
Factory Reset Carefully insert the tip of a pen or an unwound paperclip into the reset switch and press on to it. Hold down the Reset switch for 5 -10 seconds and release it. NOTE: To assure the gateway factory defaults, hold the reset switch for 5 -10 seconds. The indicators are that all LEDs turn off.