How do you test an Intermatic timer?
A: With a small flashlight, look into the Visual Motor Check window, near the top of the timer mechanism. If power is coming to the timer motor, you should be able to clearly see the gears moving through the small window. If not, then check the breaker that the time clock is connected to, turn it off and back on again.
How do I reset Intermatic?
While holding in the small reset button, simultaneously press and hold down the ON/OFF button. Hold down both buttons together for 5 seconds. After you’ve released both buttons, the screen should flash zeros before displaying the clock flashing 12:00 a.m.
How do timer trippers work?
The trippers are the physical parts that activate or deactivate the pool pump at the designated times. To set the “On” tripper for the desired times, the lighter-colored tripper can be held to the clock dial at the desired start time and then screwed down with a screwdriver to keep the tripper in place.
Why is my light timer not working?
If the timer doesn’t activate the connected light, it might be working but the light bulb in the fixture might be burned out. Get on a sturdy ladder and twist the bulb fully into the socket. Turn the light on manually via the switch timer. If the light still fails to turn on, the light bulb might be burned out.
What are Intermatic timers?
Timers automatically switch lights, machinery, and industrial processes on and off at specific times or time intervals. Also called industrial timers and time switches, they help reduce energy use by running equipment only when needed.
How do I change the time on my Intermatic timer?
Rotate the clock so that the large arrow points to the current time. Turn the yellow clock dial clockwise with your hand until the large arrow facing down points at the current time. It’s important to set this time as accurately as possible so that the timer works at the exact times you want it to.
How do I program my Intermatic outdoor light timer?
How to Set an Intermatic Wall Timer
- Erase all previous timer settings by sliding the control lever left to the “Off” position.
- Move the control lever to the “On” position.
- Turn the time dial clockwise until you reach the half hour that is closest to your present time.
- Press the time dial to set the present time.
How do I get my light timer to work?
How to Set a Light Timer
- Plug the light timer up and ensure your bulb does turn on and is not blown out.
- Turn your switch to the auto setting.
- Set the pointer on your light timer to the current time.
- Press down the tabs located around your dial for the times you want the light to on.
Why does my pool timer not work?
Having no power to your pool timer is a common problem and will occur because of three reasons: The Circuit Breaker has tripped. There’s an issue with the wiring between the circuit breaker and the timer. The terminals on the wires aren’t tight.