How do I connect my Canon Pixma MG5420 to WIFI?
Go to your wireless router and press the WPS push button on it for about 5 seconds. Then, press the OK button on the printer. The printer will attempt to connect to the network. When the printer connects to the network, press the OK button.
How do I scan using a Canon MG5420?
In the Canon IJ Scan Utility window that opens, click SETTINGS…. in the bottom right of the window. The Settings dialog box appears. 3. Click the DOCUMENT SCAN or PHOTO SCAN option on the left pane of the window, depending on what you would like to scan.
How do I change the ink in my Canon Pixma mg5420?
How To Replace Cartridge(s)
- Plug your Pixma printer to a power supply and turn it on. Then, open the operation panel.
- Each cartridge comes with its tab. Push the cartridge’s tab and then pull up to remove from its slot.
- Carefully slide in the new cartridge.
- Shut your printer’s cover and operation panel.
Why will my Canon printer not connect to WIFI?
If there have been no changes to your wireless network (new router, new password for your router, etc.), turn off and unplug your printer. Unplug your wireless router for 15 seconds, then plug it back in. After it has fully initialized, plug the printer back in and power it on. Try to print again.
How do I scan with my image Garden?
You can scan easily by automatically detecting the item type.
- Make sure that your scanner or printer is turned on.
- Place the item on the platen or ADF (Auto Document Feeder) of your scanner or printer.
- Start My Image Garden.
- Click Scan.
- Click Auto.
Why is my Canon printer not printing black?
When the printer doesn’t prints black ink, the most likely reason is the print head nozzles which when clogged prevents it from releasing black ink onto the paper. It may also stop printing black if the black ink has run out or if the blank ink cartridge is clogged.
How do I change the ink in my Canon mg5460?
- Make sure that the power is turned on.
- Open the front cover.
- Open the operation panel (A), then open the paper output tray (B). Open the operation panel (A) until it stops.
- Remove the ink tank with the lamp flashing fast.
- Prepare a new ink tank.
- Install the new ink tank.
- Close the operation panel gently.