What is the difference between 1025R and 1026R?
The 1025R hosts a three-cylinder Yanmar® TNV Series diesel engine that provides 24.2 gross engine power and 18 PTO horsepower. On the other hand, the 1026R provides operators with 25.2 horsepower. Both engines were designed with performance and durability at top of mind.
How many HP is a 1026R John Deere?
25.2 hp
John Deere 1026R
| John Deere 1026R Power | |
|---|---|
| Engine (gross): | 25.2 hp 18.8 kW |
| PTO (claimed): | 18 hp 13.4 kW |
How much does a John Deere 1026R weight?
1444 lbs
John Deere 1026R Dimensions
| John Deere 1026R Weight | |
|---|---|
| Operating: | 1444 lbs 654 kg |
| Max front axle: | 1349 lbs 611 kg |
| Max rear axle: | 1576 lbs 714 kg |
How much weight can a 1025R bucket lift?
Everything I’ve read says the 1025r & H120 has a lift capacity of 836lbs. So I was rather surprised when I put in 10 JD Quick-Tatch (R127764) weights in the bucket and the loader operated (curl, rise, lower, dump) just fine (minus the DBS of course) at idle. So that is 1040lbs, 20% above the rated capacity.
Where is the John Deere 1025R made?
The 1025R is designed and manufactured in Deere’s state-of-the-art factory located in Augusta, Ga., though still powered by a Yanmar diesel.
How fast does a 1025R go?
One must remember that a 1025R with loader weighs somewhere around 2000 lbs, whereas the 4066R/loader/wheel weights will weigh around 6000#. Therefore it weighs about 3 times as much as the 1025R and 20 MPH is plenty fast enough for it and 9 MPH is plenty fast enough for the 1025R.
How fast can a 1025R mow?
At the tractor’s maximum warp speed of 9.6 mph, it will take you 0.85 hour, or 52 minutes to complete mowing 5 acres.
Is John Deere 1025R liquid cooled?
Engine. The popular Yanmar makes the John Deere 1025R engine. Its model is the Yanmar 3TNV80F-NCJT. It is a four-stroke, liquid-cooled engine powered by diesel.
How much weight can a John Deere 1025R pull?
approximately 3,100 lbs
This means the 25 horsepower 1025R can handle a towed load of approximately 3,100 lbs and the 3025D can handle nearly 5,200 lbs. The 1025R is rated to lift 681 lbs on the rear three-point hitch and the 3025D can handle 1,670 lbs on the rear.