Can I buy just the tank for a toilet?
Replacing a toilet tank is a task most homeowners can do without a call to the plumber. Because the tanks and bowls may be sold separately, you can often buy just the tank. However, it is important to match the toilet manufacturer and model to ensure proper installation and function of the toilet when you’re done.
How do I identify my American Standard toilet tank?
Carefully remove your tank lid, and place it gently on the floor. You’ll notice a four-digit number located on the back of the tank, near the water level mark. This is your tank model number. If the number starts with a two, it is a one-piece toilet.
Are toilet tanks universal fit?
When asking the question is a toilet tank universal, the short answer is no. While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model. When looking to purchase a new tank, you need to learn the measurements and model number.
How do I know what size toilet tank I have?
Measure from the floor to the top of your toilet seat. Then measure from the floor to the top of your toilet’s tank to make sure your new toilet can fit into the same space or under any an over-the-toilet storage racks that you do not want to get rid of.
How do I measure for a replacement toilet tank?
A toilet tank’s height is measured from the floor to the top of the toilet tank. Place the end of the tape measure on the floor, and take the measurement at the very top edge of the tank lid. Toilet bowls and seats are either round or oval.
How do I know what model toilet I have?
Finding your toilet manufacturer and/or model number: Carefully remove the toilet tank lid and set it gently on the floor, with the bottom facing up. Look for the manufacturer name or a number on the bottom side of the water tank lid.
Can you mix and match toilet bowls and tanks?
There are a few models that can interchange tanks and bowls, but most are configured to work as a set, as indicated in our product showcase. If you mix and match yourself, the toilet may not flush at all. Tanks and bowls can not be mixed.
Can I use a different brand toilet tank?
This is a fairly common question, and the answer is usually no. It’s best to stick with the same manufacturer of your current toilet if you’re buying the replacement tank on its own. Though a toilet tank may look similar on the outside, and in some cases, even on the inside, it’s unlikely to perfectly match up.
What is the size of a standard toilet tank?
Overall, a standard toilet will be between 27 and 30 inches deep, with a back height of 21 to 31 inches and a width of about 20 inches. An ADA-compliant version needs to have a seat height of 17 to 19 inches.