What is a static default route?
A default route identifies the gateway to which the router sends all IP packets for which it does not have a learned or static route. A default static route is a static route with 0.0. 0.0 as the destination IP address and subnet mask. This is commonly referred to as a “quad zero” route.
How do I set a default static route?
Perform these steps to configure a default route.
- Enter global configuration mode. device# configure terminal.
- Enter 0.0. 0.0 0.0.
- (Optional) Enable the default network route for static route next-hop resolution.
- (Optional) Configure next-hop recursive lookup to resolve the next-hop gateway.
What is the example of static routing?
Static routes are created in global config mode, and require a destination prefix and a way to get there. For example, let’s say that our router’s Serial 1/1 interface, with an IP address of 192.168. 1.5/30, has a point-to-point link to another router’s Serial 2/2, with IP address 192.168. 1.6/30.
When should we use a default static route?
Static routing can be used to define an exit point from a router when no other routes are available or necessary. This is called a default route. Static routing can be used for small networks that require only one or two routes.
What is the difference between static and default route?
Static Routing – This is the method by which an administrator manually adds routes to the routing table of a router. This is a method for small networks but it is not scalable for larger networks. Default Routing – This is the method where all routers are configured to send all packets towards a single router.
What is a default route in Cisco?
The default route is a route that a router uses to forward an incoming packet when no other route is available for that packet in the routing table. Routers use the routing table to make the forwarding decision.
What is the default administrative distance of static routes?
1
The default administrative distance for static IP routes is 1, but can be configured to any value from 1 to 255. The fixed administrative distance values ensure that the routing switch always prefers static IP routes over routes from other sources to the same destination.